Safety Design

We know your child’s safety is your #1 priority, it’s Our target too. Our design the inflatable games according to the standard of EN14960 to make sure the product is in good security and used without any trouble. After you have a look at this page, you will know more information about our product and be more confident on your choice.
HIGH DURABILITY PVC MATERIAL
Best material is very important for the games. All inflatable games of Ours are made by high durability fire-retardant 18OZ Tarpaulin, which has 3 layers, two coated side with a strong net inside. The flame retardant meet BS7837. Our material has improved by the SGS tested.

Double Stitching Everywhere

We double stitching everywhere, with fourfold stitching at bottom stress point. Double stitching inside and double stitching outside, and to make sure the inflatables are strong enough.

Professional Machines

Our company has 16 years experience in stitching product, we use high quality professional inflatable sewing machines imported from Japan, the computer-controlled cutter all imported from USA. The product we stitching is delicate and safe.

Perfect Artwork

We have top skill worker to finish the artwork and printing. We imported the Korean painting machine, it print quickly and in good quality. The quality of print ink also meets the standard of SGS. Further more, we make a liquid protecting film on the surface of digital printing, the liquid protection is also imported from abroad. The high level painting makes our product will not be sticky and color fade, but sustain a long time.

Safety Rules at Enterance

We make enough air out zipper for each game according to the requirement of EN14960. So they can help you deflate the inflatable more quickly. We do reinforcement for all the zipper joints, and above the zipper, there is a zipper cover by velcro material which is help to disperse the zipper's stress. We may also make a inside PVC piece to protect the zipper(right photo)

REINFORCED STRIPS AT JOINT

Our Inflatables will make reinforce strips at the bottom joint and each corner. So when the kids bounce on the games, you do not need to worry about the safety at all. As the bottom can bear the kids no matter how they play on the games.

Protections for Small Obstacles

We make reinforcement line at the bottom of each small obstacles, so they will not be cracked after children’s push and press. And we make a protecting cover inside of the tunnels, which stick to game with velcro material.

ANCHOR RINGS FOR FIXATION

Each product will have 6 pcs thick anchor rings at least to fix the inflatable. For some big games or high slide much more anchor rings on top and bottom. They make the inflatable steady enough.

SAFETY SLIDE CLIMB

For giant slide, we specially design some ropes and fixation along the slide climb route way as you can see from the picture. Players can grasp the ropes when they climb on the slide so that it is more easy and safe to get on the top.

SAFETY BOUNCER DESIGN

For all the bouncers and other inflatable games, we make the entrance steps be less than 60cm high, and the width is same(left photo) or at least half(right photo) till the column in both side..

SAFETY PROTECTION OF NET

We will make net on top of the slide and 1m along the slide slope, to help protecting people stand on the slide platform. We may also make net wall inside of slide to protect kids get out, and for obstacles, we make net when there no inflatable wall, to make sure that kids will not fall down.

WATER OUTLET HOLES AND EYE LETS

We make good design for water outlet holes, when the games be used in rainy season or need tidy by water, it helps to let the water out quickly. And we also make water outlet eyelets at the bottom of mattress, so, the games will keep better quality for its moisture resistant.

SAFE AND CONVENIENT AIR FLAP

For the safety, we make safe flap inside the air tube, when the electricity is cut off and make the blower off suddenly,the flap will help to stop the air let out too quickly. So the kids can have enough time to leave the inflatable. And we make the air tube with valcro plus a band belt, so it’s fixed to the blower easily and stably.

TIGHT PACKAGE BAGS

We spread air out to help deflation before roll the game, then put a band belt outside to tie it. We will use tarpaulin bag which is same material as the games to package the units. So the packages will not be frazzled during delivery process. For big units, we will make extra handle band outside of the packages. In order to let you find your goods quickly, we will paste a mark paper with your order number.